The vertical machining center has a high technical content, so the operating procedures are complicated. During the operation, it is necessary to strictly follow the operating procedures to ensure the normal operation of the vertical machining center. In order to ensure the normal operation of the vertical machining center, what should we pay attention to when using the vertical machining center?
- After turning on the machine, check whether the switches, buttons and keys are normal and sensitive, assuming that the vertical machining center is abnormal.
- Never touch the rotating mechanical parts with gloves. Do not wear gloves to operate the switches and buttons on the panel. You cannot touch the switches and buttons on the operation panel with wet hands.
- Check whether the voltage, oil pressure and air pressure are normal. Manual lubrication requires manual lubrication.
- Perform daily maintenance every day. Check the transmission log before operation. Before starting the vertical machining center, check whether the voltage stabilizer is in the state of automatic voltage adjustment.
- When clamping the workpiece, pay attention to whether the pressure plate pin in the direction of the workpiece to pay attention to prevent the movement of the object, check the white part and the size of the abnormality (assuming the high point). When using a press to process a workpiece, please pay attention to whether the tool will mill the jaws, etc.
- Correctly measure and calculate the coordinate system of the part, and verify and verify the results.
- It is necessary to verify whether the tool in the program is consistent with the tool in the processing table to avoid wrong tools. Check whether the shape and size of the front and rear axes meet the requirements of the processing technology, and if you can hit the workpiece and fixture.
- Inspection and single-stage inspection cutting, the fast override switch must be placed in a lower gear
