The highest level of turning and milling compound CNC lathe processing is an advanced manufacturing technology. Compound processing is to realize several different processing technologies on one machine tool. Compound processing is widely used and difficult, that is, turning and milling compound processing. The machining center is equivalent to a combination of a CNC lathe and a machining center.
With the development of science and technology, the manufacturing industry has also begun to complete scientific and technological development, and various automated equipment has emerged continuously, which has significantly improved the processing efficiency and the quality of the product. The following introduces the scientific and technological content of the turning and milling compound CNC lathe.
The daily management points of the turning and milling compound CNC lathe mainly include the following aspects:
Daily maintenance of equipment: Before starting the machine every day, the machine tool should be cleaned, including removing dust, chips and cutting fluid on the feed chain and guide rails. At the same time, the surface of the machine tool should be cleaned, and the surface debris should be wiped with a clean soft cloth. In addition, the various parts of the machine tool should be washed to remove various impurities.
Lubrication and rust prevention: Lubricate the transmission parts of the tool magazine and apply grease to ensure the quality of the grease. At the same time, before long-term shutdown, all parts of the machine tool should be cleaned of rust-proof oil, using a damp cloth and cleaning agent.
Shutdown precautions: When shutting down, the three-axis and four-axis need to be moved to the center position. At the same time, the cooling system, clamping system, lubrication system, electrical system, etc. should be checked to see if they are normal. In addition, it is necessary to check whether there is oil leakage inside the machine tool and the hose.
Pre-recovery inspection: Before the machine tool is operated again after a long shutdown, a series of inspections and preheating work are required. For example, clean the anti-rust oil, supply coolant, check the cooling system, clamping system, lubrication system, electrical system, etc. Spindle preheating is also a necessary step. The spindle speed needs to be fixed at a safe speed and then preheated at different speeds.
Choose a suitable use environment: The use environment of the milling compound CNC lathe will affect its normal operation. Therefore, the installation conditions and requirements specified in the machine tool manual should be strictly followed. If economic conditions permit, the CNC turning and milling compound lathe should be installed separately from ordinary mechanical processing equipment for easy repair and maintenance.
Fault reporting and handling: If a CNC turning and milling compound machine tool fails, the operator should stop the machine immediately and report the fault to the superior. At the same time, take photos to record the fault phenomenon and time, and cooperate with the staff to carry out repairs and handling.
