What are the main differences between single-column and double-column in vertical lathes? How to make the workpiece have a good surface roughness? And, does the vertical lathe have a startup sequence? The main purpose of raising these questions is to thoroughly solve them, so that everyone can have a correct understanding. So, without further ado, let’s get started right away.
- What are the main differences between single-column and double-column in vertical lathes?
In vertical lathes, the main differences between single-column and double-column are in structure, performance and use. If, from the perspective of its structure, the single-column type is a single vertical tool holder plus a side tool holder, while the double-column type is a double vertical tool holder. Therefore, everyone should have a clear understanding and correct understanding of this point. - How to make the workpiece have a good surface roughness?
In this case, in the view of Wuxi Jinghua, a vertical lathe manufacturer, it is very simple to achieve this goal. It can be achieved by installing a power grinding head on the vertical lathe. Moreover, an electric motor can be installed on the carriage to help achieve this goal and improve the processing quality and effect of the vertical lathe. - Does the vertical lathe have a startup sequence?
From a professional perspective, the answer to this question is no, that is, there is no startup sequence, because there are no regulations and requirements in this regard. However, from the perspective of operating experience, the more reasonable startup sequence is: press the emergency stop – the main power of the electrical cabinet – press the system start of the operation panel – the machine tool starts – release the emergency stop – return to zero.
For the vertical lathe, I believe that through this article, if everyone studies it seriously, then, you can deepen your familiarity with the product and make some gains and progress, rather than gaining nothing and wasting this learning opportunity. Moreover, this is also beneficial to all of us. At least, it can improve the use effect of the vertical lathe, and then, improve the economic benefits of the product.
