As a major force in processing materials, the performance of profile processing center directly affects production efficiency and product quality. As the saying goes: “Three points rely on repair, seven points rely on maintenance”, the importance of daily maintenance for profile processing center is self-evident. This article will introduce you to the details of daily maintenance of profile processing center in detail to help you ensure the stable operation of the equipment.
- Cleaning work cannot be ignored
Keeping the machine tool clean is a basic requirement for daily maintenance. According to statistics, nearly half of the equipment failures are caused by dirt and dust. Therefore, after work every day, the machine tool should be cleaned as follows:
Equipment surface cleaning: After production every day, the dust and oil on the surface of the equipment should be cleaned in time to prevent dust accumulation from affecting the heat dissipation of the equipment.
Transmission system cleaning: Regularly clean the transmission system, including chains, gears, guide rails and other parts, to ensure smooth transmission.
Cutting fluid cleaning: Cutting fluid will produce a lot of impurities during use and needs to be replaced regularly to avoid affecting the processing effect and equipment life.
- Lubrication and maintenance are crucial
Lubrication and maintenance are the key to reducing equipment wear and extending service life.
Add lubricating oil on time: All moving parts of the profile processing center need lubrication, and lubricating oil should be added on time according to the equipment manual.
Check whether the oil circuit is unobstructed: Make sure that the oil circuit is not blocked so that the lubricating oil can reach each lubrication point smoothly.
Replace severely worn parts: When it is found that the parts are severely worn, they should be replaced in time to avoid affecting the normal operation of the equipment.
- Electrical system inspection
Check cables and plugs regularly: Make sure that the cables are not damaged and the plugs have good contact.
Check electrical components: Check whether each electrical component is working properly. If there is any abnormality, it should be repaired or replaced in time.
Maintain the cooling system: Make sure that the cooling system is operating normally to avoid damage to electrical components due to overheating.
- Tool management
Check tool wear regularly: Replace severely worn tools in time to ensure processing quality.
Tool storage: Keep the tools dry and clean when storing to avoid rust.
Tool loading and unloading: Load and unload tools correctly to avoid tool damage due to improper operation.
